Sorry. We did not find anything.
The FUSO Canter 3.5 t is ideally suited for use in the city and urban environments. Its compact dimensions and the design as a front steer without a nose make it extremely agile, manoeuvrable and shunting-friendly.
With the smallest turning circle in the 3.5-tonne class – 10.2 m with a wheelbase of 2,500 mm – and due to the excellent all-round visibility, Canter drivers can get further wherever they would have to shift into reverse gear with another van. All this, additionally, with increased driving comfort thanks to the standard independent wheel suspension on the front axle.
Speaking of getting further: With up to 5.7 m – at a wheelbase of 3,850 mm – the Canter 3.5 t is also the leader in its segment in terms of maximum body length.
Its characteristic steel ladder frame – in frame widths of 700 mm or 750 mm, depending on the cab variant selected – gives the Canter chassis remarkable robustness and load-bearing capacity. This is complemented by above-average maximum axle loads – 1,950 kg on the front axle and 2,500 kg on the rear axle – and up to 3.5 tonnes permissible towing capacity. The Canter 3.5 t is a real light truck, everything else is just a van.
| 3S13 | 3S15 | ||||
| Cabin | Standard (1,7 m) | Standard (1,7 m) | |||
| Cabin Type / Seats | Single / 3 | Single / 3 | |||
| Wheelbase (mm) | 2.500 | 2.800 | 3.400 | 2.500 | 2.800 |
| Chassis Payload (kg) | 1.565 | 1.555 | 1.530 | 1.565 | 1.555 |
| Maximum Body Length (mm) | 3.500 | 3.995 | 4.985 | 3.500 | 3.995 |
| Axle Loads (front / rear) | 1.950/2.500 | 1.950/2.500 | |||
| Transmission | 5-speed manual transmission, 6-speed DUONIC dual-clutch transmission | 5-speed manual transmission, 6-speed DUONIC dual-clutch transmission | |||
| Maximum power/torque | 96 Kw (130 PS) / 350 Nm | 110 Kw (150 PS) / 400 Nm | |||
| Minimum turning circle wall to wall (m) | 10,2 | 11,2 | 13 | 10,2 | 11,2 |
| 3C13 | 3C15 (D) | ||||||||
| Cabin | Comfort (2,0m) | Comfort (2,0m) | |||||||
| Cabin Type / Seats | Single / 3 | Single / 3 | Double / 6 | ||||||
| Wheelbase (mm) | 2.500 | 2.800 | 3.400 | 3.850 | 2.500 | 2.800 | 3.400 | 3.850 | 3.400 |
| Chassis Payload (kg) | 1.460 | 1.455 | 1.430 | 1.415 | 1.460 | 1.450 | 1.425 | 1.410 | 1.205 |
| Maximum Body Length (mm) | 3.500 | 3.995 | 4.985 | 5.725 | 3.500 | 3.995 | 4.985 | 5.725 | 3.985 |
| Axle Loads (front / rear) | 1.950/2.500 | 1.950/2.500 | |||||||
| Transmission | 5-speed manual transmission, 6-speed DUONIC dual-clutch transmission | 5-speed manual transmission, 6-speed DUONIC dual-clutch transmission | |||||||
| Maximum power/torque | 96 Kw (130 PS) / 350 Nm | 110 Kw (150 PS) / 400 Nm | |||||||
| Minimum turning circle wall to wall (m) | 10 | 11 | 12,6 | 14 | 10 | 11 | 12,6 | 14 | 12,6 |
| 6S15 | |||
| Cabin | Standard (1,7 m) | ||
| Cabin Type / Seats | Single / 3 | ||
| Wheelbase (mm) | 2.500 | 2.800 | 3.400 |
| Chassis Payload (kg) | 3.785 | 3.770 | 3.740 |
| Maximum Body Length (mm) | 3.500 | 3.995 | 4.985 |
| Axle Loads (front / rear) | 2.300/4.360 | ||
| Transmission | 5-speed manual transmission | ||
| Maximum power/torque | 110 Kw (150 PS) / 400 Nm | ||
| Minimum turning circle wall to wall (m) | 11,4 | 12,4 | 14,6 |
| 6C18 (D) | ||||
| Cabin | Comfort (2,0 m) | |||
| Cabin Type / Seats | Single / 3 | Double / 7 | ||
| Wheelbase (mm) | 3.415 | 3.865 | 3.415 | 3.865 |
| Chassis Payload (kg) | 3.685 | 3.665 | 3.465 | 3.445 |
| Maximum Body Length (mm) | 5.005 | 5.750 | 4.005 | 4.750 |
| Axle Loads (front / rear) | 2.800/5.125 | 2.800/5.070 | 2.800/5.125 | 2.800/5.070 |
| Transmission | 5-speed manual transmission | |||
| Maximum power / torque | 129 Kw (175 PS) / 430 Nm | |||
| Minimum turning circle wall to wall (m) | 14,9 | 16,5 | 14,9 | 16,5 |
| Slope angle (front/rear) | 35°/25° | |||
| Ground clearance under the axles front/rear (mm) | 210/185 | |||
| 7C15 (D) | 7C18 (D) | |||||||||||
| Cabin | Comfort (2,0 m) | Comfort (2,0 m) | ||||||||||
| Cabin Type / Seats | Single / 3 | Double / 7 | Single / 3 | Double / 7 | ||||||||
| Wheelbase (mm) | 2.800 | 3.400 | 3.850 | 4.300 | 3.850* | 2.800 | 3.400 | 3.850 | 4.300 | 4.750 | 3.850 | 4.750** |
| Chassis Payload (kg) | 4.970 | 4.940 | 4.920 | 4.875 | 4.705 | 4.970 | 4.940 | 4.920 | 4.875 | 4.855 | 4.705 | 4.620 |
| Maximum Body Length (mm) | 3.995 | 4.985 | 5.725 | 6.470 | 4.725 | 3.995 | 4.985 | 5.725 | 6.470 | 7.210 | 4.725 | 6.210 |
| Axle Loads (front / rear) | 3.100/5.800 | 3.100/5.740 | 3.100/5.680 | 3.100/5.740 | 3.100/5.800 | 3.100/5.740 | 3.100/5.680 | 3.100/5.640 | 3.100/5.740 | 3.100/5.640 | ||
| Transmission | 5-speed manual transmission, 6-speed DUONIC dual-clutch transmission | 5-speed manual transmission, 6-speed DUONIC dual-clutch transmission | ||||||||||
| Maximum power/torque | 110 Kw (150 PS) / 400 Nm | 129 kW (175 PS) / 430 Nm | ||||||||||
| Minimum turning circle wall to wall (m) | 11,8 | 13,8 | 15,2 | 16,6 | 15,2 | 11,8 | 13,8 | 15,2 | 16,6 | 18 | 15,2 | 18 |
| *only available with manual transmission | **only available with DUONIC | |||||||||||
| 9C18 | ||||
| Cabin | Comfort (2,0 m) | |||
| Cabin Type / Seats | Single / 3 | |||
| Wheelbase (mm) | 3.400 | 3.850 | 4.300 | 4.750 |
| Chassis Payload (kg) | 5.985 | 5.950 | 5.935 | 5.895 |
| Maximum Body Length (mm) | 4.985 | 5.725 | 6.470 | 7.210 |
| Axle Loads (front / rear) | 3.100/5.800 | |||
| Transmission | DUONIC 6-speed dual-clutch transmission | |||
| Maximum power/torque | 129 kW (175 PS) / 430 Nm | |||
| Minimum turning circle wall to wall (m) | 13,8 | 15,2 | 16,6 | 18 |
With the Canter 3.5 t, three cab variants allow for a customised and individual configuration.
Two economical 3-litre engines are available for the Canter 3.5 t in the performance levels 95 kW (130 hp) and 110 kW (150 hp).
Along with a conventional 5-speed manual transmission, FUSO offers the DUONIC® 2.0 dual-clutch transmission for the Canter 3.5 t.
The Canter 3.5 t is equipped with various modern assistance and safety systems.
For the Canter 3.5 t, FUSO offers tipper and platform bodies in various designs directly from the factory.
The interior of the Canter 3.5 t combines practical functionality with a driver-oriented focus.
The portfolio of the Canter 3.5 t convinces with a number of other practice-oriented equipment features.
The FUSO Canter 3.5 t is ideally suited for use in the city and urban environments. Its compact dimensions and the design as a front steer without a nose make it extremely agile, manoeuvrable and shunting-friendly. Its turning circle of just 10.2 m with a wheelbase of wheelbase of 2,500 mm, is the smallest in the 3.5 tonne category.
With its cab width of only 1.7 m, the FUSO Canter 6.0 t is an absolute specialist for high payload requirements with the smallest external dimensions. A real exception in its segment. Even the most demanding transport tasks that combine heavy loads with narrow driveways are unimpressed by the robust and manoeuvrable light truck.
The FUSO Canter 6.5 t 4×4 is a flexible and efficient all-rounder that is ideal for use in changing conditions and proves its strengths all year round. With selectable all-wheel drive, engageable reduction transmission and self-locking differential, it can offer everything needed for higher traction requirements.
The FUSO Canter 7.5 t is simply the best choice for (almost) every job, because its convincing key data make it an ideal vehicle for almost all logistics applications. Almost 5 t chassis load capacity, all 6 available wheelbases to choose from and the ideal interior concept with an excellent access width stand for absolute practicality.
The FUSO Canter 8.55 t offers an excellent payload balance with almost 6 t of chassis load and a gross vehicle weight rating (GVWR) of up to 12.05 t. Its standard DUONIC® 2.0 dual-clutch transmission stands for a comfortable driving experience and smooth gear changes without traction interruption.
In twelve years of continuous development work, FUSO has turned its vision of the future of emission-free driving into reality. Yet the technically fully functional and roadworthy prototype of the Canter E-Cell in 2010 was only the beginning.This was followed by the presentation of the first eCanter in 2016. As the first fully electrically powered truck ever, it went into small series production in 2017, went into small-series production in 2017 and has been in use with various fleet fleet customers since 2018.
The FUSO Canter 3.5 t is ideally suited for use in the city and urban environments. Its compact dimensions and the design as a front steer without a nose make it extremely agile, manoeuvrable and shunting-friendly. Its turning circle of just 10.2 m with a wheelbase of wheelbase of 2,500 mm, is the smallest in the 3.5 tonne category.
With its cab width of only 1.7 m, the FUSO Canter 6.0 t is an absolute specialist for high payload requirements with the smallest external dimensions. A real exception in its segment. Even the most demanding transport tasks that combine heavy loads with narrow driveways are unimpressed by the robust and manoeuvrable light truck.
The FUSO Canter 6.5 t 4×4 is a flexible and efficient all-rounder that is ideal for use in changing conditions and proves its strengths all year round. With selectable all-wheel drive, engageable reduction transmission and self-locking differential, it can offer everything needed for higher traction requirements.
The FUSO Canter 7.5 t is simply the best choice for (almost) every job, because its convincing key data make it an ideal vehicle for almost all logistics applications. Almost 5 t chassis load capacity, all 6 available wheelbases to choose from and the ideal interior concept with an excellent access width stand for absolute practicality.
The FUSO Canter 8.55 t offers an excellent payload balance with almost 6 t of chassis load and a gross vehicle weight rating (GVWR) of up to 12.05 t. Its standard DUONIC® 2.0 dual-clutch transmission stands for a comfortable driving experience and smooth gear changes without traction interruption.
In twelve years of continuous development work, FUSO has turned its vision of the future of emission-free driving into reality. Yet the technically fully functional and roadworthy prototype of the Canter E-Cell in 2010 was only the beginning.This was followed by the presentation of the first eCanter in 2016. As the first fully electrically powered truck ever, it went into small series production in 2017, went into small-series production in 2017 and has been in use with various fleet fleet customers since 2018.
The FUSO Canter is a product of Daimler Truck AG and is available in 32 European countries. Throughout Europe, more than 800 support points of the Mercedes-Benz service network offer advice, sales, maintenance and repair of all services related to the Canter in the highest quality.
